This product range covers ADEKA’s proprietary halogen-free flame retardant blends based on intumescence. Products offered in this range are ADK STAB FP-2100JC and ADK STAB FP-2500S. Whereas ADK STAB FP-2100JC offers a higher thermal stability and can be processed up to 250°C, ADK STAB FP-2500S differentiates as a low dust form with a slightly lower processing window (240°C), but at the same time allowing for lower loadings (approx. -5%) compared to ADK STAB FP-2100JC
ADK STAB AO-26 is a novel antioxidant highly suitable for use in XLPE power cable applications. In the power cable industry, further improvements of heat stability and cost effectiveness are sought and ADK STAB AO-26 can achieve both demands. ADK STAB AO-26 shows excellent heat stability, but at the same time does not interfere with the cross-linking reaction between XLPE and the cross-linking agent such as DCP as conventional antioxidants do.
ADK STAB RUP-177 is recommended for transparent cable applications and provides excellent retention of color and resistance to thermal ageing whilst not interfering with electrical properties. Recommended loading levels are 3-7 phr.
ADK STAB RUP-110 provides excellent retention of color and resistance to thermal ageing whilst not interfering with electrical properties. It is recommended for service temperatures ranging between 75-125°C, and is particularly suitable for service temperatures exceeding 90°C. Recommended loading levels are 5-12 phr.
ADK STAB RUP-190E is a lead Free PVC Stabilizer for Wire and Cable. It has been specially developed for use in wire and cable, especially for the automotive applications, with particular emphasis on high temperature heat stability, high resistance to aging, electrical properties and mechanical properties. ADK STAB RUP-190E is free from heavy metals such as lead, cadmium and barium.
ADK CIZER C-8LS is a linear C8 plasticizers suitable for 90-125°C service temperature,
ADK CIZER C-810L is a mixed linear C8, C10 plasticizer suitable for 90-125°C service temperature
ADK STAB FP-600 is a halogen free flame retardant recommended for PC, PC/HIPS and PC/ABS blends as well as PPE. It is a high molecular weight liquid phosphate ester with good hydrolytic stability and hence provides lowest vapor emissions during processing and provides minimum impact on mechanical properties such as impact behavior and HDT. As it is halogenfree, it causes no corrosion in processing and provides lowest generation of corrosive combustion gases.
ADK STAB FP-900L is a liquid, bisphenol A free flame retardant, complementing the phosphate ester range of ADEKA. It offers processing benefits as it is less plasticizing than BDP (proven in PC/ABS), enabling better mechanical properties. It provided good stability upon recycling simulation in PC/ABS.
Copyright © 2020. All rights reserved. ADEKA AL OTAIBA MIDDLE EAST LLC .